NEW ARIAS PISTONS FOR OPEL / VAUXHALL AND TOYOTA 4AG 20 VALVE
Opel / Vauxhall NITROUS / TURBO new 2.0 liter
Stock Bore: 3.386, 86.0mm Stroke: 3.386 Rod Length: 5.630 Head cc: 43.0 Gasket: .050 Deck: -.010
Bore Comp. Dome Compression RatioComp. Gram Part Required
in/mm Height CC w/ Stock Head Wt. Number Ring Set
3.392 / 86.16 1.200 -22 8 call OP2016T 1515303392
Toyota 4AG ALL MOTOR 20 VALVE
Stock Bore: 3.189, 81mm Stroke: 3.031 Head cc: 34.5 Gasket: .028
Bore Comp. Dome Compression RatioComp. Gram Part Required
in/mm Height CC w/ Stock Head Wt. Number Ring Set
3.209 / 81.50 1.209 0 11.2 call 3730400 1012283209
15 Comments »
Leave a comment
-
Recent
-
Links
-
Archives
- July 2009 (2)
- April 2007 (1)
- March 2007 (2)
- February 2007 (1)
- January 2007 (1)
- December 2006 (3)
-
Categories
-
RSS
Entries RSS
Comments RSS
What’s the price for 4ag arias pistons? What’s the compression, I mean, can I use it with turbo?
we have pistons for normally aspirated and turbo engines… your pick. below are the specs for the turbo pistons
Toyota 4AG 20 VALVE
Stock Bore: 3.189, 81mm Stroke: 3.031 Head cc: 34.5 Gasket: .028
Bore Comp. Dome Compression RatioComp. Gram Part Required
in/mm Height CC w/ Stock Head Wt. Number Ring Set
DISH TOP Turbo/Nitrous
3.209 / 81.50 1.209 -9 9 286 3730250 1212403209
Whats the compression ratio for the N/A version of the 4A-G 20 valve pistons? Cheers
Sam,
part# 3720050 is 9:1 for turbo application
part# 3730400 is for NA application and it has a compression ration of 11.2:1
Hi, I am interesting part# 3720050, where can I see the price for it?
The price for the full set (pistons, pins, rings, and retaining clips) is $595.00. we will have all the information in our online store soon.
send an e-mail to eng@ariaspistons.com and i will send you more information if needed.
whats the weight of both the 20v pistons with the pin included?
3720050 TURBO PISTON
PISTON WEIGHT 286 GRAMS
PIN WEIGHT 110 GRAMS (STD DUTY GOOD FOR 20# BOOST)
TOOL STEEL PIN AVAILABLE 100 GRAMS GOOD FOR 30# BOOST
TOTAL WEIGHT 396 GRAMS
3730400 11:1 HIGH COMPRESSION PISTON
PISTON WEIGHT 293 GRAMS
PIN WEIGHT 70 GRAMS (NORMALLY ASPIRATED ONLY)
TOTAL WEIGHT 363 GRAMS
Hi, I was wondering if you guys would be able to make a 2.5mm over for a silvertop 20v
are the 20 valve 4ag turbo pistons, a direct replacement for the stock units,( minus the compression change) i mean do the wrist pins press in or are they floating??
These pistons are .5mm over size (.020″) and have full-floating wrist pins.
looking pistons for turbo aplication for 1.8 ecotec opeal motor need advise
hey watzup i want to buy some pistonrings for my toyota 3sgte but oversized. the piston is trademark ‘arias’ plspls let me know?????
DEAR SIR
I would like to know if you would make (1) pistion for a 292 L-6 Chevy/GMC engine. I have 5 with no wear on them I blew the motor up over 20 years ago.Now i would like to use them in a street rod. I am a member of the INLINER INTERNATIONAL my card number is 261. What information do you need to do this? It is a flat top with no valve relefsand has a full skirt with 1/16×1/16×3/16. rings.
THANKS STUART
I just got a set of AR-3320202 pistons with rings just curious what I should set my ring gaps at? This application is for a turbo ls-vtec build with 17-20psi and 400+whp
Thanks
just bought set of 4age 20v piston parts #3730400,but its 10.6 cr, written on the box,i thought it should be 11.1 cr.